teflon? pfa 340
全氟烷氧基
dupont fluoropolymers
產品說明
dupont? teflon? pfa 340 is a general-purpose resin available inclear, 2.5-mm (0.1-in.) pellets. compared with other grades ofteflon? pfa, its most unique features are a relatively high flowrate and properties that make it suitable for a variety ofprocesses and demanding end uses.
teflon? pfa 340 and the other teflon? pfa (perfluoroalkoxy)fluoropolymer resins combine the processing ease of conventionalthermoplastics with properties similar to those ofpolytetrafluoroethylene. they have high melt strength, stability athigh processing temperatures, and resistance to creep at highservice temperature.
teflon? pfa 340 is used when traditional extrusion and moldingprocesses are required for producing products with the superiorproperties of a fluoropolymer resin. for a given process, its highmelt strength and thermal stability can be used to improve rates.compared with other fluoropolymers, its creep resistance at itshigh service temperatures provides a superior balance and level ofend-use properties.
properly processed products made from neat teflon? pfa 340 resinprovide the superior properties typical of the fluoropolymerresins: retention of properties after service at 260°c (500°f),useful properties at -196°c (-320°f), and chemical inertness tonearly all industrial chemicals and solvents. dielectric constantand dissipation factor are exceptionally low. molded products havemoderate stiffness and high ultimate elongation.
in a flame situation, products of teflon? pfa 340 resistignition and do not themselves promote flame spread. when ignitedby flame from other sources, their contribution of heat is smalland with very little smoke.
statements, or data, regarding behavior in a flame situation arenot intended to reflect hazards presented by this or any othermaterial when under actual fire conditions.
總體
材料狀態 ?已商用:當前有效
供貨地區 ?北美洲 ?歐洲
?南美洲 ?亞太地區
?剛性,良好 ?良好的熔體強度 ?耐氣候影響性能良好
性能特點 ?抗溶解性 ?流動性高 ?煙釋放,低
?良好的抗蠕變性 ?耐化學性良好 ?延展性,高
用途 ?薄膜 ?工業領域: ?管道
?電器導線絕緣材料 ?管道 ?型材
外觀 ?清晰/透明
形式 ?顆粒料
加工方法 ?擠出 ?壓縮模塑
?樹脂傳遞成型 ?注射成型
物理性能 額定值單位制 測試方法
比重 2.14g/cm3 astmd792
熔流率(372°c/5.0kg) 14g/10 min astm d1238
吸水率(24hr) 0.030% astm d570
機械性能 額定值單位制 測試方法
抗張強度 astm d638
屈服, 23°c 13.8mpa
23°c 24.8mpa
250°c 12.4mpa
伸長率 astm d638
斷裂, 23°c 300%
斷裂, 250°c 480%
彎曲模量 astm d790
23°c 586mpa
250°c 55.2mpa
硬度 額定值單位制 測試方法
硬度計硬度(邵氏d) 55 astm d2240
熱性能 額定值單位制 測試方法
熔融溫度 302到310°c
線形膨脹系數-流動 astm d696
21到100°c 0.00014cm/cm/°c
100到149°c 0.00017cm/cm/°c
149到209°c 0.00021cm/cm/°c
1 /2
teflon? pfa340 2012年9月30日
全氟烷氧基
dupontfluoropolymers
電氣性能 額定值單位制 測試方法
體積電阻率 1.0e+18ohm?cm astm d257
介電強度2 (0.254mm) 79kv/mm astm d149
介電常數 astm d150
60 hz 2.03
1 mhz 2.03
耗散因數 astm d150
60 hz 0.00010
1 mhz 0.00010
可燃性 額定值單位制 測試方法
極限氧指數 95% astm d2863
補充信息
specific gravity, astm d792: 2.12 to2.17
mit folding endurance, 0.18 to 0.2mm (0.007 to 0.008 in): 15000cycles
water absorption, astm d696:<0.03%
limiting oxygen index, astm d2863:>95%
upper service temperature:500°f
weather and chemical resistance:outstanding
注射 額定值單位制
螺筒后部溫度 316到332°c
螺筒中部溫度 329到343°c
螺筒前部溫度 371°c
射嘴溫度 371°c
加工(熔體)溫度 343到399°c
模具溫度 149到260°c
注塑溫度 20.7到55.2mpa
注射速度 慢
合模力 6.9kn/cm2
"PFA/美國杜邦/340/鐵氟龍"的廠家(產地)為美國杜邦,性能是電器導線絕緣材料,用途級別為注塑級,擠出,樹脂傳遞成型,壓縮模塑,牌號是340
塑料
銷售:塑膠原料、塑膠輔料、塑膠制品、塑膠助劑、化工原料(不含危險化學品)、其他化工產品(不含危險化學品)、五金制品、電子產品;貨物進出口、技術進出口。(依法須經批準的項目,經相關部門批準后方可開展經營活動)〓
東莞市帝邦塑料有限公司位于樟木頭塑膠原料中心城,地理位置十分的優越,是專業生產、加工、銷售塑膠原料與改性工程塑料于一體的綜合性企業。 公司自2016年8月成立以來,運用高新科技探測和分析塑膠原料的市場規則,建立完整的市場供應系統,為您提供最佳服務和優質平價的產品。 通用塑膠原料:ABS、PMMA、SAN(AS)、GPPS、HIPS、PP、PE等。 工程塑膠原料...