顆粒木炭 六角木炭 工業機制木炭高溫機制木炭

1.冶金工業
　　以前木炭就用來冶煉鐵礦石，木炭與焦炭熔煉的生鐵，即使化學組成相同，其結構與機械性質仍不相同。木炭冶煉的生鐵一般具有細粒結構，鑄件緊密，沒有裂紋的特點，用木炭生產的生鐵含雜質少，適于生產優質鋼。由于木炭具有還原性，所以在冶金工業可以用來還原礦石冶煉金屬。
　　在有色金屬生產中，木炭常用作表面助熔劑，當有色金屬熔融時，表面助熔劑在熔融金屬表面形成保護層，使金屬與氣體介質分開，既可減少熔融金屬的飛濺損失，又可降低熔融物中氣體的飽和度。
　　大量木炭還用于結晶硅生產，生產結晶硅用的木炭不應含有生炭頭和過多的灰分。
2.滲碳劑的制造
　　凡是要求表面具有較高的硬度和耐磨性，而中心具有良好韌性的所有鋼制品都要進行滲碳。用來對鋼制品進行滲碳作用的含碳混合物稱為滲碳劑。單純木炭的滲碳效果較差。因此常用木炭作為原料，再加入一定數量的接觸劑，制成滲碳劑。
3.二硫化碳生產
　　木炭是制造二硫化碳的原料，用來制造二硫化碳的木炭，應當是堅硬、容積重大、灰分和水分含量小，固定碳含量高。
　　生產1噸二硫化碳約需0.5噸的木炭。
4.木炭磚的壓制
　　碎木炭運輸很不方便，而且用途也受到限制，用壓制木炭磚的方法能使價值很小的碎木炭變成優質燃料。木炭磚具有吸濕性和吸水性小、比重大和熱值高的優點，而且在使用過程有很高的機械強度。煅燒過的木炭磚在燃燒時無煙，不產生炭塵。木炭磚可用于冶金、移動式氣化爐等。

機制木炭，大家平常簡稱機制炭、再生木炭、人造炭、環保木炭、無煙炭等。機制木炭Zui先由日本研制，產品稱"木力虧仆"，后傳到中國臺灣，然后才轉到內地來的！

  機制木炭是什么樣的呢？通常外型為直徑5厘米左右的四角形、六角形和圓形三種，長度可以任意截取，一般為8到50厘米長，中間有一小孔，方面通氣用！機制木炭所用原來通常為木屑和竹屑，經專門的制棒機高溫高壓擠壓成型，當然原材料在使用前是要用烘干機烘到只含水分10%以下！很多人以為稻殼、花生殼、玉米芯、玉米稈、高粱稈等也可以燒制成炭，是沒錯，用這些材料可以壓制成棒，可不能炭化成木炭！為什么呢？因?yàn)檫@些材料所含纖維構造不同和元素不一樣，使得在使用后所剩的灰粉很多，燃燒值也很低，火力不夠大！

  機制木炭因?yàn)榻?jīng)過高壓高溫，所以密度很大，是一般木材的2到3倍，也是自然木炭的3倍左右！更是泥煤、焦炭的4到5倍！相當于無煙煤的比重（無煙煤1350～1800千克/立方米）！雖然我國煤炭資源豐富，但高硫份、高灰份的煤炭較多，而低硫份、低灰份的煤炭較少。比如我國動力煤平均灰份為28％-30％，煤炭中的含硫量也很高，全國平均為1-1.2％，南部地區普遍高達4％以上。這些煤炭如果不加處理即直接燃用，就會產生嚴重的二氧化硫和煙塵污染。而機制木炭更本解決了這個問題，它所含的灰份僅少于5%，發熱量也能達到7000-8000大卡/kg！機制木炭在炭化窯里炭化的過程中，已經把大部分有害物質燃燒，分解了！所以機制木炭具有比重大（密度高）、熱值高、成本低、使用方便、清潔衛生等優點，便于貯存和運輸，是居民生活、取暖和工業生產用能，可替代煤炭等，燃燒后的固體（灰粉）排放量低于煤炭，減少了廢渣排放，也比較方便處理，基本沒有環境污染問題；氣體排放指標大大優于國家氣體排放標準。

 機制木炭的市場廣闊。飯店、工廠、農業、畜牧業、冶金、環保、實驗等！

 1. metallurgical industry
previously used for smelting iron ore, charcoal on charcoal andcoke smelting of iron, even if the same chemical composition,structure and mechanical properties are still the same. charcoalsmelting of pig iron generally has fine structure, casting tight,no cracks in the characteristics of the production of pig ironusing charcoal containing impurities less suitable for producinghigh steel. as the charcoal is reductive, so can be used torestore the metallurgical industry ore smelting metal.
in the non-ferrous metal production, charcoal is often used assurface flux, when the non-ferrous metal melting, the surface fluxin the molten metal surface protective layer, so that separation ofmetals and gases, can reduce the loss of molten metal splash, butalso reduce the melting material in gas saturation.
a large number of charcoal is also used to produce crystallinesilicon, crystalline silicon used in charcoal production should notcontain too many students head and charcoal ash.
2. carburizing agent manufacturing
all re of high surface hardness and wear resistance, goodtoughness and the center of all steel products should be cementite.carburizing of steel products used to carry out the role of carboncompounds known as carburizing agent. carburizing pure charcoalless effective. therefore, charcoal used as a raw material, thenadd a certain amount of contact with agents, made of carburizingagent.
3. disulfide production
charcoal is the manufacture of carbon disulfide in the best rawmaterials used to produce carbon disulfide in the charcoal, shouldbe hard, great volume, ash and moisture content in small, fixedcarbon content.
produce about 1 ton of carbon disulfide, 0.5 tons of charcoal.
4. charcoal brick repression
crushed charcoal transport is very convenient, but use isrestricted, with the suppression of the value of charcoal bricks inthe way that it can become a high- small pieces of charcoalfuel. charcoal bricks with water absorption and water absorption ofsmall, heavy, and the advantages of high calorific value, but alsoin the process of using a high mechanical strength. burning offburning charcoal bricks in a smoke-free, does not produce carbondust. charcoal brick can be used for metallurgy, such as mobilegasifier.
mechanism charcoal, we normally referred to as charcoal, charcoalregeneration, artificial carbon, green charcoal, charcoal and othersmoke-free. first developed by the japanese machine-made charcoal,the product called "wood strength loss servant", after the journeyto taiwan before coming to the mainland!
what is the mechanism of charcoal like? the outline is usuallyabout 5 cm in diameter square, hexagonal and round three, thelength can be any interception, usually 8-50 cm long, the middle ofa small hole, side ventilation with! mechanism of charcoal isusually used in the original wood and bamboo cuttings, by specialrods for high pressure extrusion molding machine, of course, is theuse of raw materials before using the dryer drying to moisturecontent below 10% only! many people think that rice husk, peanutshell, corn cob, corn stalks, sorghum stalks, etc. can also befired into carbon, is yes, with these materials can be compressedinto bars, can not be carbonized into charcoal! why?
because these materials contained in the fiber structure anddifferent elements are different, making the remaining ash afteruse a lot of value is very low burning, fire is not big enough!
mechanism charcoal because after high pressure high temperature, somuch the density is generally 2 to 3 times the timber is about 3times the natural charcoal! is peat, coke 4 to 5 times! e the proportion of anthracite (anthracite 1350 ~ 1800 kg / cubicmeter)! although rich in coal resources, but high sulfur and highash coal more, while low-sulfur, low ash coal less. example, theaverage chinese steam coal ash is 28% -30%, the sulfur content ofcoal is also high, the national average of 1-1.2%, in the southernregion in general as much as 4%. the coal that is, if not addresseddirectly to fuel use,
will cause serious pollution of sulfur dioxide and soot. themechanism of charcoal also the solution of this problem, itcontains only less than 5% ash, the heat can reach 7000-8000 kcal /kg! mechanism of carbonized charcoal kiln in the process ofcarbonization, has the most harmful substances in combustion,decomposition of the! so has the proportion of machine-madecharcoal (high density), high heat value, low cost, easy to use,clean the advantages of easy storage and transport, is living,heating and industrial production, energy use, and can replacecoal, combustion solid (ash) emissions than coal
reduction of waste emissions, but also easier to handle, littleenvironmental pollution; gas emission targets much better than thenational gas emission standards.
mechanism charcoal vast market. hotels, factories, agriculture,animal husbandry, metallurgy, environmental protection andexperiment!

"顆粒木炭 六角木炭 工業機制木炭高溫機制木炭"的產地為河南，規格是50（mm），固定炭含量為95%以上，種類是燒烤炭，水分為3（%），灰分是8（%），發熱量為8000（kcal/kg），新奇創意項目是報名