designation品名：dcsocket

model型號：

edition版本：01

page頁碼：1 of 2

1.0構造tectonic

a型狀、尺寸依照制品圖而規定.
shape, size in accordance with the provisions of mapproducts.

b外觀:各部位應良好無秤銹、裂痕、電鍍不良現象.

appearance: the good parts should weigh no rust, cracks, electroplatingill.

2.0使用環境條件the useof environmental conditions

a環境濕度humidity:25℃~+70℃

b相對濕度relativehumidity:≤93%(+40℃)

c機械性能mechanicalproperties

d動作力powermoves:3~25n

e端子強度terminalstrength

各端子在各方面承受500克力作用下,在10秒內,無脫落、破損等不良現象,但彎曲也可.

theterminals in all aspects under 500caledon role, in 10 seconds,without any loss, damage and other negative phenomena, but alsobending.

4.0電氣性能electricalperformance

a額定電流currentratings:dc 12v1a .

b接觸電阻contactresistance:50mω以下.

c絕緣電阻insulationresistance:

在端子之間各端子與殼之間加ac500v條件下,持續1分鐘測試.100mω以上.theterminal between the terminal and shell in between 500v acconditions, sustained a minute test ω m above .100.

d抵抗電壓resistancevoltage:

在端子之間端子與殼之間加ac 500v60hz條件下,持續1分鐘測量.無擊穿現象出現.inbetween the terminal and the terminal shell in between ac 500v 60hzconditions, sustained a minute measurement. no breakdownphenomenon.

5.0可靠性試驗reliabilitytest

a壽命試驗lifetest

以涂有薄層潤滑脂的插頭(涂潤滑脂防止摩擦過熱)以每分鐘15~20次,無負載插座撥出5,000次，符合規格3.0和4.0規定值.coatedwith a thin layer of grease plugs (tu grease prevent frictionoverheated) per minute to 15 ~ 20, a no-load socket allocated5,000, with the specifications 3.0 and 4.0 providesvalue

b溫度試驗temperaturetest

將插座放置于40±2℃,相對溫度90%~95%環境中,96個小時后取出,取去水滴,將插座放置于常溫常濕環境中,于30分鐘內測試,符合規格3.0和4.0要求.socketto be placed on the 40 ±2℃, relative humidity of90% ~ 95% of the environment, 96 hours after the removal, taking adrop of water, will be placed in the socket temperature often wetenvironment, in the test within 30 minutes, with 3.0 and 4.0specifications re

c耐熱試驗heattest

將插座放置于70±2℃環境下,96個小時后取出,將插座放置于常溫常濕環境中,于30分鐘內測定,符合規格3.0和4.0要求.socketto be placed on the 70 ±2℃environment, 96 hoursafter the removal of sockets placed on the temperature and moistureenvironment, within 30 minutes measured with 3.0 and 4.0specifications re

d耐寒試驗hardytrial

將插座放置于-40±3℃環境中,96個小時后取出,取去水滴,將插座放置于常溫濕環境中.于30分鐘內測定,符合規格3.0和4.0要求.

socketto be placed on the 40 ±3℃environment, 96 hoursafter the removal, taking a drop of water, will be placed in thesocket regular temperature and humidity environment. within 30minutes measured with 3.0 and 4.0 specificationsre

5.5耐焊接熱試驗thermalresistance welding test

插座耐焊接熱試驗中,符合規格3.0和平共處4.0要求.

socketwelding thermal resistance test, with the specifications re 3.0 peaceful coexistence.

a自動焊;溫度235±5℃,時間5±1秒.automaticwelding; temperature of235℃± 5, ± a time fiveseconds.

b人動焊;溫度350±10℃,時間3±0.5秒.peopleto welding; the temperature of 350 ±10℃for 3 ± 0.5seconds.

"DC電源插座（SMT)DC-056"的額定電壓為12（V），型號是DC-056，額定電流為1（A），品牌是HJ，環境溫度為耐高溫260度（℃），加工定制是否