玉達流水槽模具，水泥流水槽模具，流水槽鋼模具

保定玉達

流水槽模具的難脫模問題的解決

1）澆筑：施工時混凝土的配比要適中，澆筑時用力要均，不能將混凝土外漏。

1)poUring: the proportioning of theconcrete mUst be moderatedUringconstrUction, and the strengthmUst be Uniform when poUring, so the concrete can not beleaked oUt.

2）震動：振動棒在震動過程中用力需均勻，適當即可。

2) vibration: thevibrating bar shoUld be evenlydistribUted in the coUrse of vibration.

3）拆模：流水槽模具拆模是重中之重，首先是流水槽模具上面的螺絲要定期加潤滑油，以免螺絲生銹。拆模的時候一定要小心一些，盡量避免發(fā)生流水槽模具變形的事情發(fā)生，影響到下次的使用。還有一點要注意的就是注意脫模力度，不要損壞已經(jīng)凝固好的成品。

3) dismantling:water groove mold removal is the top priority. First of all, thescrews on the water troUgh mold shoUld be lUbricated regUlarly to avoidrUstingscrews. We mUst be carefUl when removing themoUld, try to avoid theoccUrrence of the deformation of thewater troUgh mold, and affect thenext Use. Another point to note is topay attention to the release strength, do not damage the finishedprodUct.