RCB保溫齒輪泵可以輸送的介質包括:瀝青,乳化瀝青,拼板膠,山梨醇,太古油,乳化油,油脂,椰子油,大豆油,高溫潤滑脂,按摩油,雙氧乳,油漿,熱熔膠,合成膠粘劑,聚氨酯密封膠,耐高溫硅膠等.

　　瀝青保溫齒輪泵結構形式：Asphaltinsulation gear pump structure:

　　泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水等媒體對輸送的液體和泵進行加熱保溫及冷卻。Pump body has a hollow sandwich, with import and export offlange, can be used in the thermal oil, steam, hot water and othermedia for conveying liquid and heat insulation and coolingpump.

適用范圍：Scope ofapplication:

　　適用于輸送無腐蝕性、不含固體顆粒、在常溫下有凝固性的介質，尤其適用于高寒地區室外安裝和工藝過程中介質需要保溫的場合，介質溫度可達250℃、粘度為5-1500cst。

Is applicable totransport non-corrosive, not containing solid particles, at roomtemperature with coagulability medium, especially in cold areaoutdoor media need to heat preservation in the process ofinstallation and process, medium temperature can reach 250℃, the viscosity of 5 to 1500 CST.

用途說明：Purpose:

　　為輸送常溫下變稠，凝固或結晶而維持一定溫度又容易流動的介質而設計的，如瀝青、石蠟、松香及性質類似的液體，溫度不高于200℃。For transport has thickened under normaltemperature, solidification or crystallization and maintain acertain temperature and easy flow of medium, such as asphalt,paraffin wax, rosin and properties similar liquid, the temperatureis not higher than 200 ℃.

    RCB瀝青保溫泵分為普通與鑄鋼兩種材質，均帶有保溫夾套，保溫泵適用于常溫下有凝固性或結晶而通過加溫并保持一定溫度又容易流動且有潤滑性的液體，以及高寒地區室外安裝和工藝過程中需要保溫的場合，泵開始工作時首先預熱降低了泵的起動功率。適用于輸送有腐蝕性或無腐蝕性、衛生條件要求較高的液體，輸送介質不含固體顆粒，溫度不高于350℃，粘度為5cSt——1500cSt的液體，如各種化工原料、灌裝醫藥、食品、化妝品、農藥、洗滌劑、印染、釀造、樹脂、膠類等行業。該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過1500cSt時，應采用減速機傳動。RCBasphalt heat pump can be divided into ordinary and cast steelmaterial, with thermal insulation jacket, heat pump underapplicable interesting coagulability and crystallization and byheating and maintain a certain temperature and easy flow andlubricity of liquid, in the process of the high altitude andoutdoor installation process and need to heat preservation, pumpstarts to work when the first preheating reduced the starting powerof the pump.Applicable to transport corrosive or non-corrosive,health conditions to demand higher liquid, medium not containingsolid particles, the temperature is not higher than 350℃, the viscosity of liquid for 5 CST - 1500 CST,such as filling a variety of chemical raw materials,pharmaceutical, food, cosmetics, pesticide, detergent, printing anddyeing, brewing, resin, rubber and other industries.The pump driveway has two kinds of motor and deceleration machine, when more than1500 CST liquid viscosity reducer drive should beadopted.

   瀝青保溫泵的泵體設有空心夾層，并設有進出口法蘭，可用于導熱油、蒸氣、熱水、等媒體對輸送的液體和泵進行加熱保溫及冷卻該泵傳動方式有電機直聯和減速機兩種，當液體粘度超過1500cSt時，應采用減速機傳動。Asphaltheat pump pump body has a hollow interlayer, with import and exportof flange, can be used in the thermal oil, steam, hot water, suchas the media for the transportation of liquid and pump heatinsulation and cooling ways there are to the pump drive motor anddeceleration machine two, when more than 1500 CST liquid viscosityreducer drive should be adopted.